Roofing Sheeting

Company Logo

A & D Discount Roofing Supplies

39 Chetwynd St, Loganholme, QLD 4129

Ph: 07 3801 3188  Fax: 07 3801 2088

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Roof Top Banner Image

Roof Sheeting

A & D Discount Roofing Supplies carry a range of Factory Seconds sheeting in a wide range of colours and lengths.  We are also able to supply a wide variety of new roofing sheets.  Some common profiles are listed below..

Product Name

Image

Details

Corrugated

Corrugated diagram

Most common profile, 

Available in 0.42mm , 0.48mm and 0.6mm(Curving Quality)  Base Metal Thickness.

Finishes - Colorbond , Zincalume or Imported zinc

Bluescope Trimdek

 Bluescope Trimdek profile

Typically identified by the pans (flat parts) rising to make a central ridge.

Available in 0.42mm , 0.48mm Base Metal Thickness.

Finishes - Colorbond , Zincalume

Monoclad / Steelclad / Superdeck / Hi Ten

 Monoclad Superdeck profile image

Typically identified by the pans (flat parts) appearing to be divided into three equal sections and the middle section raised approx 1 mm.

Available in 0.42mm , 0.48mm Base Metal Thickness.

Finishes - Colorbond , Zincalume or Imported zinc

Spandek / Longspan / Apspan / Smartspan

 Monoclad Superdeck profile image

Typically a "squarer" type of corrugated. The number of ribs per sheet may vary from 8 (Longspan) to 9 (Spandek, Apspan, smartspan etc), depending on supplier.

Available in 0.42mm , 0.48mm Base Metal Thickness.

Finishes - Colorbond , Zincalume

Kliplok

 Klip lock diagram

Sheeting that is not screwed down, instead, it attaches to battens via clips.

Pattern and dimensions vary from supplier to supplier.  Please contact us directly with measurements for further information.

Available in 0.42mm , 0.48mm Base Metal Thickness.

Finishes - Colorbond , Zincalume

 

Can't see your preferred profile listed?  Contact us directly and we will endeavour to locate the product for you.